Sterling Springdale Concrete and MasonrySterling Springdale Concrete and Masonry

Stone veneer installation in Springdale AR - a stone face built on a sound wall

Tired siding or bare foundation block you'd like faced in stone? We check the wall first, then set stone that suits your house.

Large house facade clad in pale rectangular stone veneer, with tall windows, white columns, and two chimneys.
  • Fully licensed and insured.
  • Free in-person estimates.
  • Replies within 1 business day.

Is stone veneer right for your Springdale house?

The short answer: Stone veneer installation in Springdale is the work of setting manufactured stone in mortar onto an outside wall. It gives your house a stone face on the front, along the foundation or across a whole side without building a full stone wall.

Most people who call about stone have a wall they're tired of looking at, like bare block along the foundation or siding that's seen better days, and the first question is whether that wall can take stone at all. The price moves with how much wall you're covering, how many corners, windows and doors the stone has to work around, the joint style you pick and whatever repair the wall needs first. The schedule mostly turns on that repair and on the weather. When I come out, I'll look at your wall and walk you through an estimate for it. If you'd rather have full-thickness natural stone, that's stone masonry, a different job I'm happy to talk through too.

How do you know your wall is ready for stone veneer?

  • Bare block above the ground

    You see a band of gray block or plain concrete between the dirt and the siding. That's usually just how the house was built, and stone dresses it up well, but if the block is cracked or leaning, waiting means those cracks end up under the stone instead of fixed.

  • Siding that's soft or stained

    If the lower siding or trim gives when you press it, or there are dark stains near the bottom, water has usually been getting behind it for a while. Stone over that would hide the rot rather than stop it, and every season you wait lets it spread further into the framing.

  • Old stone with stains or gaps

    Existing stone with white crusty streaks, cracked joints or pieces that sound hollow when you tap them usually means water is moving behind it with no good way out. The damage happens in the wall you can't see, so the repair grows while the face still looks mostly fine.

How we handle stone veneer installation

Before any stone goes up, we make sure the wall behind it is sound and work out how water will get back out, because that hidden layer counts for more than the stone you pick. I start by checking the existing wall for soft spots, cracks and old damage, and we fix what's unsound instead of covering it. Then our crew puts up the water barrier and the flashing, thin metal pieces that steer water out at the bottom and around windows and doors. We fasten the lath, a wire mesh the mortar grabs onto, and trowel on the scratch coat, a first layer of mortar scored so the stone has something to bond to. Each stone gets set with full mortar behind it, the bottom edge stays up off the soil, and we fill and tool the joints and clean up before we leave.

Stone often goes on walls we build ourselves. If you're adding a garden wall, a raised planter or a screen wall, our concrete block walls give the stone a solid, square base, and when the wall under it is a foundation that needs rebuilding, foundation block wall installation comes first and the stone goes on after.

  • Grouted mortar joints

    Stones set with a visible mortar joint between them suit older and more rustic houses, and the joint forgives the natural size differences in the stone. It's the look I steer most people toward on a foundation band, because it sits well next to brick and plain siding.

  • Tight-joint look

    Stones fitted close with little or no mortar showing give a cleaner, stacked look that suits newer, simpler houses. It takes more cutting and fitting, so it usually costs more, and every stone still needs full mortar behind it even though you can't see any between them.

What happens when you call us about stone veneer?

Here's how a stone veneer job goes with us, from the first call to the walk-through at the end. Most of the deciding happens at the wall itself, so that's where I spend the most time.

  1. Step 01

    Call us or send the form

    Tell us which wall you want faced and when you'd like it done. A few photos of the wall, its current finish and a rough size help me show up with the right questions.

  2. Step 02

    I check the wall and estimate

    I come out, look the wall over, work out what's behind any trouble and walk you through the estimate. You'll see what the wall needs before stone goes on, your stone and joint options, and what each choice does to the price.

  3. Step 03

    We build it and walk through

    Once you're ready, we look into permits, our crew does the work and we go over the finished wall with you. Ask about the hidden layers while they're still showing, because once the stone is up you won't see them again.

Stone veneer installation in Springdale and nearby

Springdale sits in both Washington and Benton counties, so whether your stone job needs a permit, and from which office, depends on your address, and I won't guess at it. We check with the city or county office for your address before any work starts, and when a permit is needed we take care of applying for it.

We're based in Springdale and work across the cities around it in northwest Arkansas. A lot of houses here have a strip of bare block along the foundation or stone on the front only, and we pick and set new stone so it looks like it belongs on the house, the same as we do on jobs in Rogers and Fayetteville.

Get a free on-site estimate for your stone veneer

We'll get back to you within one business day to set a time. I come out, look over the wall and walk you through a free estimate, and there's no obligation to go ahead.

(479) 231-3391

Why Springdale homeowners call Sterling Springdale Concrete and Masonry

  • Licensed and insured for home improvement

    Arkansas law counts anyone who bids on, contracts for or manages work improving an existing single-family home, and the structures that go with it, as a home improvement contractor, and facing your walls in stone falls under that. We're fully licensed and insured.

  • The person who estimates stays involved

    I'm the one who comes out to look at your wall and give the estimate, and our crew does the work with me on site most of the time. What I spot on that first visit doesn't get lost on the way to the job.

  • Thirteen years working out causes

    We've been in business since 2013, and what I'm best known for is figuring out why a wall or foundation is giving trouble. That's the habit you want from whoever looks at your wall before stone covers it for good.

On a stone job, the work that matters most is the layer you'll never see once it's done. Reach us through the contact page or call (479) 231-3391, and I'll come take a look at your wall.

Stone veneer questions from Springdale homeowners

How much does stone veneer installation cost in Springdale, AR?

Across the US, installing stone veneer usually costs about $25 to $40 per square foot, and that's a national figure for the whole country, not a quote for your wall. Square footage is only part of it, since repairs to the wall behind and the joint style can move the number. Call or send the form and I'll walk you through the figure for yours at the estimate.

Can stone veneer go over my existing siding or wall?

It can go over a wall that's sound, but not over one that isn't. The masonry industry's guide says manufactured stone shouldn't be installed over deteriorating or unsound walls, or over EIFS, the foam-backed, stucco-look finish some houses have. That's why I check your wall before we talk about stone, and if siding has to come off or the wall needs repair, you'll know at the estimate.

What causes stone veneer to fail?

Water getting behind the stone is the usual cause. One lath maker reports that problems with adhered stone come from water getting in and damaging the structure behind it, and missing or poor flashing and missing or torn barrier layers often make it worse. On a framed wall with lath and a scratch coat, current industry guidance calls for two separate barrier layers lapped like shingles and tied into the flashing and openings, with the stone stopping at least 4 inches above the finished soil line.

Can stone veneer be installed in cold weather?

Yes, as long as the fresh work is protected. Industry guidance says masonry needs protection when it's 40°F or below, before, during and for at least 48 hours after the stone goes up. If your job lands in the cold months, ask how the crew will protect it, and I'll tell you how we'd handle yours.

What is the best way to choose a stone veneer installer?

Pick the crew that talks about the wall behind the stone, not just the stone. The masonry industry's guide says workmanship tends to be the main source of problems, and that following its recommended practices helps the stone perform as intended for decades. Ask how they'll check the wall and handle the flashing and barrier, and whether they cut with water or use HEPA dust collection, since cutting stone and mortar can throw off silica dust you don't want to breathe.

Is manufactured stone veneer cheaper than real stone?

Usually, yes. One lath maker describes manufactured stone veneer as significantly more economical and easier to install than real stone, which makes it the lower-cost way to get a stone look on most houses. If you've got your heart set on natural stone, I'll talk that through with you too.

  • Concrete block walls

    A new block wall for a planter, screen or garden edge gives stone a solid, square base and can be faced to match the stone on your house.

  • Foundation block wall installation

    When the block under your house is cracked, bowed or due for rebuilding, a new foundation wall gets the stone off to a solid start.

Have your wall checked before buying stone

Call (479) 231-3391 before you spend anything on stone, so the wall gets checked and any repair gets priced while your choices are still open.

(479) 231-3391Request an estimate