Masonry restoration in Springdale AR - new mortar that protects your old brick
Crumbling joints, flaking brick or a stained patch under the gutter? We find what's wearing the wall out and repoint it so it holds up.

- Fully licensed and insured.
- Free in-person estimates.
- Replies within 1 business day.
What does masonry restoration on a brick house actually involve?
The short answer: Masonry restoration in Springdale, AR usually comes down to repointing, which means raking the worn mortar out of the joints in your brick or stone and packing in new mortar, along with fixing whatever wore it out and cleaning the wall without hurting it.
Most walls I look at have been wearing for years before anyone notices, so the real question is how far it goes and what started it. The price moves with how much of the wall needs new mortar, whether some bricks are cracked through and need brick repair as well, and how high the work goes, since walls tall enough to need scaffolding cost more per square foot to repoint. The schedule turns on getting any leaks fixed before the mortar goes in, and on the weather if the wall needs washing. You'll get your own figure at the estimate, after I've seen the wall and worked out what's behind the wear.
How do you know your brick or stone needs restoring?
Joints that turn to sand
If you can scrape mortar out with a key, or it sifts out as sand when you rub it, the joints aren't keeping water out anymore. It can usually wait a season, but the longer water gets in, the more likely the bricks start going too, and that's a bigger job.
Brick faces flaking off
When the face of a brick flakes or pops off, water is usually getting trapped inside it because something around it won't let it dry out. Each winter of waiting tends to take another layer, so it's worth finding the cause before more bricks go.
Washed-out patch under a downspout
A stained, washed-out stretch below a gutter corner or downspout usually means water has been running down that part of the wall for a while. Repointing there before the water's stopped just means doing it twice.
How we handle masonry restoration
We start with your gutters and downspouts, because water from a leaking downspout can wash the mortar right out of a wall, and new joints under a leak wear out the same way the old ones did. Then we talk with you about how the wall gets cleaned before anyone brings out a pressure washer. After that our crew rakes the worn mortar out of the joints down to sound material, mixes a mortar that suits your brick in strength and in color, packs the joints in layers and tools them to match the rest of the wall, so the repair looks like it's been there all along. We clean up as we go, so you're not left with mortar crumbs in the flower beds.
Restoration often turns up other work on the same house. If the fireplace inside is cracked past saving or you've always wanted one, we also do fireplace installation, built to sit well with the brick you've just had restored. And when a plain block foundation or a dated wall needs a better face, stone veneer installation gives it the look of stone that fits the rest of the house.
Spot repointing
This suits a wall that's sound overall but worn in one area, often below a bad gutter or on the side that takes the most weather. We fix the cause and repoint just that stretch, matched so it doesn't stand out.
Whole-wall repointing
This suits a house where the mortar has gone soft on every side, which is common when all the brick went up at the same time. Doing it in one go keeps the joints even in color and depth across the whole wall.
Older house with lime mortar
Federal guidance for historic buildings replaces mortar in kind, matched to the original through a lab analysis, and keeps it no stronger than the stone around it or the original mix, which on old buildings is lime based. If your house is old enough to have lime mortar, that's the standard worth asking about, and we'll talk it through at the estimate.
What happens when you call about masonry restoration in Springdale?
Here's how a restoration job goes with us, from your first call to the last joint. Nothing starts until you've seen what's wrong with the wall and what we'd do about it.
- Step 01
Call or send the form
Call (479) 231-3391 or fill in the form, and we'll get back to you to set a time for me to come out. A rough idea of where the trouble is helps me plan the visit.
- Step 02
I look the wall over
I come out, look at the brick, the joints and where the water goes, and work out what's behind the wear. The estimate walks you through the cause, what we'd do about it and what it costs, before anything starts.
- Step 03
We fix the cause, then repoint
Once you're ready, our crew starts with any drainage fixes and then does the mortar work. If the wall needs washing, we plan that around the weather.
- Step 04
Go over the finished wall
When we're done, we go over the finished job with you, joint by joint if you like. I'll also point out anything worth keeping an eye on, like a gutter that needs clearing each fall.
Masonry restoration in Springdale, and what we see on jobs here
The City of Springdale has a Building Department and a Planning Department, and for a Springdale address they're who we ask. Before any work starts, we check with the city or county office that covers your property, and when a permit's needed we take care of applying for it, so that's one less thing on your plate.
Our winters swing above and below freezing, which is hard on joints that already let water in, and plenty of the brick houses we see have their worst wear right where a gutter overflows. We find the same thing on jobs in Fayetteville and Rogers, so the first thing I look at is where the water goes.
Get a free estimate on your brick or stone wall
We'll get back to you within one business day to set a time. I'll come out, look the wall over, work out what's behind the trouble and walk you through the estimate, with no obligation to go ahead.
Why Springdale homeowners call Sterling Springdale Concrete and Masonry
The owner comes out to look
I'm the one who comes out, looks over the wall and gives you the estimate, and I'm on site most of the time while our crew does the work. The person who figured out what went wrong is the one keeping an eye on the fix.
Doing this work since 2013
We've been in business since 2013, and I learned the trade alongside an experienced mason after years of working on machinery. That background is why I want to know how a wall failed before I touch it.
Licensed and insured for home repairs
Arkansas law counts anyone who bids on, contracts for or manages repair work on an existing single-family house as a home improvement contractor, and that includes a mason fixing your walls. We're fully licensed and insured, and it's fair to ask the same of anyone else you're talking to.
If your joints are wearing out and you'd like to know why, get in touch and I'll come take a look.
Masonry restoration questions from Springdale homeowners
How much does masonry restoration cost in Springdale, AR?
Across the US, repointing or tuckpointing brick usually costs about $500 to $2,500 per 100 square feet, so treat that as a general market guide rather than our price. Where your wall lands depends on how deep the wear goes and what has to be fixed first, and you'll get your own figure at the estimate.
How often does brick mortar need repointing?
Brick and stone mortar usually needs repointing about every 25 to 30 years, according to one cost guide. Joints under a leaky gutter or on the side that takes the weather can go sooner, so I go by what the joints look like rather than the calendar.
Can power washing damage my brick?
Yes, it can. Water at too high a pressure, as in power washing and water blasting, is very abrasive and can easily etch marble, other soft stone and some types of brick. Ask any mason how they plan to clean your wall before you agree to power washing.
What is the best mortar for repointing an old brick house?
The best mortar is one that's softer than your brick and lets moisture evaporate through it. Mortar is meant to wear first and protect the bricks, and national preservation guidance describes a wall where hard portland-cement mortar, less permeable than the soft bricks, trapped moisture until water pressure popped the surface off the bricks. That's why we match the mix to the brick instead of reaching for the hardest one.
What is the best time of year to clean a brick wall?
Clean with water only in weather with no chance of frost or freezing, because water left inside the masonry can freeze and flake or crack the brick. A wall can take more than a week to dry, so water cleaning needs to wrap up several days ahead of the first cold snap.
How do I make sure a cleaner or new mortar won't damage my wall?
Ask for small test patches first. Federal guidance for historic buildings calls for testing every product in a hidden spot before the full job, because the tests show the best method and confirm the product does no harm. It's a fair thing to ask any mason, and I'm happy to talk about where a test makes sense on your wall.
Other masonry work that pairs with restoration
Fireplace installation
If the firebox or surround inside has cracked beyond patching, a new fireplace built to match the restored brick outside keeps the house looking like one piece.
Stone veneer installation
When plain block or a dated facade needs a fresh face, thin stone set over it gives the look of solid stone and can match your other masonry.
Tell us about your brick or stone
Call (479) 231-3391 or use the estimate form, and if you send photos, the wall's rough size and any downspouts that leak, I'll show up already knowing where to look.
