Masonry contractor in Rogers, AR - repairs that fix the cause and walls built for slopes
Sterling Springdale Concrete and Masonry repairs and builds brick, block and stone work for homes in Rogers, AR, from tuckpointing and chimney repair to retaining walls and walkways. We find out why something failed before we fix it.

- Fully licensed and insured.
- Free in-person estimates.
- Replies within 1 business day.
Masonry in Rogers, from downtown brick to new builds
The short answer: Sterling Springdale Concrete and Masonry is a masonry contractor working in Rogers, AR, a short drive up from our base in Springdale. We repair cracked joints, tired chimneys and failing walls, and we build new walls, walkways, paver driveways and outdoor kitchens, starting with why the old work gave out.
Rogers sits just up the road from us, past Lowell, and the masonry here tends to come in two kinds. Around historic downtown it's older brick that's been patched a few times, and out toward Pea Ridge and the newer subdivisions it's brick and stone veneer on younger houses, plus the walls, walkways and outdoor kitchens people add once they've settled in.
Rogers also has more hills than people expect, so plenty of yards drop off in back. That changes the job, because a wall or a set of steps on a slope has to hold back soil and shed water, not just look right.
Rogers homes and what wears out their masonry
On older houses near downtown, the trouble is usually the mortar. Joints wear back over the years and let water into the wall, and if someone patched them with mortar harder than the brick, the brick faces start popping off instead of the joints, so when we repoint we match the mortar to the brick and the color to what's already there.
Out on the sloped lots, it's walls and walkways. A retaining wall that's leaning or bulging usually has water trapped behind it, and steps that sink at one end usually had a thin or soft base under them. I'd rather rebuild the drainage or the base along with the wall than reset blocks on the same problem, because that problem is what brings you back to calling someone in a few years.
Masonry services we bring to Rogers homes
Foundation repair
When a crack runs through your foundation wall, we work out whether settling or water caused it and fix that along with the crack.
Chimney repair
For a chimney with crumbling joints, loose brick or a cracked cap on top, we repair what's failing and track down where the water is getting in.
Tuckpointing
When the mortar on an older brick house has worn back from the edges, we grind out old joints and refill them with matching mortar.
Brick repair
Cracked bricks, bricks with flaking faces and loose ones get cut out and replaced with brick matched to your wall's size and color, so the repair blends in.
Driveway pavers
If your concrete driveway is cracked or sinking, pavers over a compacted base give you a surface that flexes and lets single pieces come up for repair.
Retaining wall construction
Sloped yards here often need a wall to hold the ground, and we build them with gravel and drainage behind so water drains out instead of pushing.
Masonry restoration
For older brick and stone around downtown Rogers that's been patched over the years, we clean, repoint and repair it so it looks original again.
Fireplace installation
When you want a masonry fireplace in an addition or an existing room, we build the firebox, surround and hearth in brick or stone to suit the house.
Stone veneer installation
A thin layer of stone over a block foundation, a porch base or a plain wall can dress up a newer house without the weight of full stone.
Concrete block walls
When you need a sturdy wall for a yard or a shop, we lay concrete block on a proper footing, reinforced where the load calls for it.
Foundation block wall installation
On additions and new builds, we lay the block foundation walls the house sits on, set square and level so the framing and brick above go up right.
Outdoor kitchen masonry
If you want a grill station or pizza oven out back, we build the base in block and finish it in brick or stone that fits your house.
Walkway construction
A walkway that's sunk or heaved, or a hillside path that needs steps, gets built in brick, stone or pavers on a packed base.
Brick wall installation
For a new brick wall, mailbox column or entry pillars, we match brick and mortar to your house so the new work fits right in.
Stone masonry
Natural stone walls, steps and columns are fitted piece by piece by hand, which takes longer than block but gives a look that suits a hillside yard.
Brick pointing
When just a few patches of mortar are cracked or missing, say under a window or by the chimney, we repoint those spots and leave the rest.
Get a free on-site masonry estimate in Rogers
Send the form with a few lines about what you're seeing, and we'll get back to you within one business day to set a time. I come out to your Rogers property myself, figure out what's behind the trouble and walk you through a free estimate, with no obligation to go ahead.
Working in Rogers: permits, licensing and what sets the price
If your house is inside the Rogers city limits, permits are the city's call, and work that needs one waits until it's issued, so on a structural repair or a tall retaining wall the permit sets the first date on the calendar, not our crew. The contractor who files a residential permit with the City of Rogers has to have their licensing current in the city's system, which is a fair thing to ask any mason before you hire them. We're fully licensed and insured, we check with the office for your address before work starts, and when a permit is needed we apply for it.
The price mostly comes down to how much old work has to come out, how tall and long a wall runs, how much drainage or base goes in behind or under it, and how close we can match the brick or stone already on your house, and a special brick order can push the start date along with any permit. I give you your own figure once I've seen the job. As a masonry contractor in Springdale, AR, we're up here regularly and next door in Bentonville, and before any footing gets dug the city points people to Arkansas One Call at 1-800-482-8998 to have buried lines marked, so we make that call first.
How it goes when you call us about a Rogers job
I've run this business since 2013, and the steps don't change much from job to job, whether it's one cracked chimney or a new wall across the back of your yard.
- Step 01
Call or send the form
Call (479) 231-3391 or use the form and tell us what's going on, a cracked joint, a leaning wall or something new you want built. We'll set up a time for me to come out to your place in Rogers.
- Step 02
I look the job over
I ask a few questions, look over the wall, chimney or yard and work out what's behind the trouble, and if it can wait, I'll tell you so. Then I walk you through the estimate so you can see what's driving the number, and it helps if you're home for that part.
- Step 03
Permits, then the work
Once you're ready, we look into permits for your address, and any permit review comes before our start date. Our crew does the work, and I'm on site most of the time.
- Step 04
Walk the finished job together
When the work's done, we clean up and go over it with you. That's your chance to look closely and ask about anything before we call it finished.
Rogers masonry questions homeowners ask us
Do I need a permit for masonry work in Rogers, AR?
The city requires a building permit for structural repairs, additions and remodels that change the structure, plus any brick or block fence over 7 feet tall or set on concrete footings, while cosmetic work like painting or tiling needs none. The city's list doesn't name repointing or brick repair, so for that kind of job the city suggests calling its Building Inspection office at (479)-621-1100 before work begins.
How tall can a retaining wall be in Rogers before I need a permit?
A retaining wall over 4 feet tall needs a building permit in Rogers. On a steep back yard it's easy to go past that, so I measure the finished height at the estimate and we plan the permit in from the start if the wall needs one.
Can I do my own masonry work on my house in Rogers?
Yes, if the house is your main residence you can do the work yourself, but you still pull the permit when the job needs one, because the city inspects the work and expects you to finish it yourself. If you hire someone, they pull the permit and they're responsible for the work.
How do I get a permit if I live just outside the Rogers city limits?
Outside the city limits, the City of Rogers has no jurisdiction, so permits and inspections go through the Benton County Risk Reduction office at 479-271-1003. Give us your address and we'll check which office covers it before we start.
How long does a building permit last in Rogers, AR?
A permit in Rogers stays valid for 6 months as long as the work keeps getting inspections. Work can start without one only in an after-hours or weekend emergency, with the permit due the next business day, and otherwise the city can issue a Stop Work Order and add a penalty fee when the permit is issued.
What drives the cost of masonry work in Rogers, AR?
On Rogers jobs the biggest local cost factor is usually the slope, because hauling block and stone up a hillside yard by hand is slower than unloading at the curb. A wall that holds back a hill also needs more gravel and drainage behind it than one on flat ground, and I'll show you where that lands in your estimate.
Plan your Rogers masonry project with us
Call (479) 231-3391 or send the form, and if I look at your crack and it can wait, I'll tell you that too.




