Sterling Springdale Concrete and MasonrySterling Springdale Concrete and Masonry

Fireplace installation in Springdale AR - a fire that heats the room or just looks good

Cold room, drafty open hearth or no fireplace at all? We'll help you pick a new fireplace or an insert and build it right.

Covered patio with a stone fireplace, outdoor kitchen, seating, and a swimming pool at dusk.
  • Fully licensed and insured.
  • Free in-person estimates.
  • Replies within 1 business day.

Should you build a new fireplace or put an insert in the one you have?

The short answer: Fireplace installation in Springdale means one of two things. Either a new fireplace goes in, built of brick or stone on site by a mason or set as a factory-built unit, or a closed-door insert goes into the fireplace you already have so it burns slower and cleaner.

Most folks who call me want either a fire to look at on a cold evening or a fire that actually heats the room, and whether your chimney works settles a lot of the rest. Price moves with that choice, because a fireplace a mason builds costs more than a factory-built one. It also moves with what the chimney needs, whether that's a liner or chimney repair before anything else, and with the brick or stone you face it in. The schedule turns on the same things, plus ordering the unit and checking permits for your address, and the estimate gives you the figure for your own house.

How do you know it's time for a new fireplace or an insert?

  • Cold room, fire going

    You've got a good fire going and the room still feels chilly, or the rest of the house gets colder once it's lit. That usually means an open fireplace is sending its heat and your warm air up the chimney, and every winter you wait is more wood burned for not much warmth.

  • Smoke drifting into the room

    Smoke rolling out of the opening, or a smell that hangs around after the fire, usually points to a chimney that isn't drawing right because of a blockage, a bad damper or a flue that's the wrong size. Keep using it and the soot stains the face and the room, so it's worth finding the cause before any new unit goes in.

  • Cracks in the firebox

    Cracked firebrick, open joints or loose brick at the back of the fireplace mean years of heat have worn it down. Hairline cracks can usually wait a season, but open joints let heat get where it shouldn't, so I'd have it looked at before the next cold snap.

  • A wall that wants one

    Maybe there's no fireplace at all and you keep picturing one on the living room wall. Nothing's wrong there, but planning early lets you choose between a built fireplace and a factory-built one before the room gets finished around it.

How we handle fireplace installation, from choosing to building

I start by asking whether you want a fire to look at or one that heats the room, and then I check whether your chimney works, because those two answers steer you toward a new fireplace or an insert. For an insert, we look at what kind of fireplace you have and what shape the chimney is in, then set the unit and run a liner up the flue when it needs one. For a new masonry fireplace, our crew pours the footing, lays the firebox and hearth and builds the chimney, picking brick or stone that looks like it belongs on your house. A factory-built unit gets set and framed around to the maker's instructions, and on every job we clean up as we go so you're not living in brick dust.

A fireplace is often more than the firebox. Plenty of homeowners face the surround or the whole chimney with stone veneer installation, a thin stone facing that gives the look of solid stone without the weight, and an outdoor fireplace or a new chimney usually starts with concrete block walls as the solid core we build on.

  • New masonry fireplace

    This suits you if you want the fireplace to be the center of the room, built in brick or stone to match the house. It's the bigger project, so it fits best when you're building or remodeling and can give it the time.

  • Factory-built fireplace

    This suits a room or addition with no fireplace yet, where you want a fire without building a full masonry firebox and chimney. We can still face it in brick or stone so it doesn't look like a box in the wall.

  • Insert in your fireplace

    This suits you if you've got an open fireplace with a working chimney and you want real heat out of it. A closed door and a slower burn mean less wood, less draft and a warmer room.

What happens when you call about a fireplace in Springdale?

It's a short process. You tell us what you've got and what you want, I come take a look, and you get a clear picture of the work before anyone lays a brick.

  1. Step 01

    Call or send the form

    Tell us whether you have a fireplace now and what you'd like from it. We'll get back to you and set a time for me to come out.

  2. Step 02

    I look over the fireplace

    I check what kind of fireplace you have, whether the chimney works and what's behind any trouble, then walk you through the estimate. You'll see the option that fits, the work it takes and the price before you decide anything.

  3. Step 03

    We look into permits

    Once you're ready, we check what your address needs and handle it before work starts. Then we set a schedule around the unit and materials.

  4. Step 04

    We build and walk through

    Our crew does the work and cleans up each day. When it's done, we go over the finished fireplace with you, how it runs and what upkeep it needs.

Fireplace installation in Springdale, permits and the houses we see

In Springdale, the city's Buildings Department issues mechanical permits, and it's the office to ask whether your fireplace or insert needs one. You can reach it at 479.750.8154. I don't assume either way, so before work starts we check with the city or county office for your address, and when a permit is needed we take care of applying for it.

Around Springdale we mostly see older brick fireplaces nobody has lit in years and factory-built units in newer houses, and with both the first question is whether the chimney still works. It's the same check we make on jobs in Fayetteville, Rogers and the other cities around Springdale.

Get a free on-site estimate for your fireplace or insert

Send the form and we'll get back to you within one business day to set a time for me to come out. I'll look over your fireplace and chimney, work out what fits and walk you through the estimate, and there's no obligation to go ahead.

(479) 231-3391

Why Springdale homeowners call Sterling Springdale Concrete and Masonry

  • I do the estimate myself

    I'm the one who looks over your fireplace and chimney and gives the estimate, and I'm on site most of the time while our crew does the work. The person who sized up the job is the one keeping an eye on it.

  • Running this business since 2013

    I came to masonry after years working on machinery, learned the trade beside an experienced mason and started this business in 2013. That machinery habit stuck, so I want to know why a firebox cracked or a chimney smokes before I fix anything.

  • Fully licensed and insured crew

    You're welcome to ask about that at the estimate. If you go with gas, Arkansas licenses gas fitters, so it's fair to ask whoever works on your gas line whether they hold that license.

  • Brick and stone that fit

    We pick brick, stone and mortar to suit your house, so a new fireplace looks like it was always there. Satisfaction guaranteed.

On a fireplace, what matters most is matching it to your chimney and to how you'll actually use it. Send us a few details or call (479) 231-3391, and I'll come take a look.

Fireplace installation questions from Springdale homeowners

How much does fireplace installation cost near Springdale AR?

Fireplace and chimney installation in Fayetteville usually costs about $2,300 to $13,000 per project. That's the going rate for the whole job in that area, not our price, and where yours lands depends on the type, the chimney and the finish. I'll give you a figure for your own house at the estimate.

Will a fireplace insert work in my existing fireplace?

Usually, if you have a masonry or factory-built fireplace with a chimney that works, and in most cases the insert also needs a chimney liner. A factory-built, or zero-clearance, fireplace is pickier, because EPA guidance says it has to take an insert designed and tested for that unit. I check which kind you have when I come out.

What is the best way to get more heat from a fireplace?

For most homes it's a closed-door insert, because a traditional open fireplace loses over 90 percent of the fire's heat up the chimney and pulls the room's warm air along with it. An insert slows the fire and burns it more completely, and many reach efficiencies above 65 percent, so far more of that heat stays in the room. If you mostly want the look, an open fireplace is still a fine choice.

How do I plan a fireplace insert installation?

Pick your fuel early, wood or gas, because the type and size of the chimney liner depend on it. Then make sure the chimney works, since an insert needs one that does, and we can plan the rest from there.

Can a gas fireplace go in a house without a chimney?

Yes, today's gas units can vent through an existing chimney or straight out through the roof or the wall behind the unit. What EPA guidance doesn't support is a gas unit with no outside vent at all, because of indoor air quality, and some places don't allow them.

How often should the chimney be checked after an insert goes in?

Once a year, by a sweep certified by the Chimney Safety Institute of America, is what the hearth industry's trade group suggests for any kind of insert. Plan for that when you finish the surround, since the insert generally comes out when it's serviced.

  • Stone veneer installation

    If you'd like the fireplace wall or chimney to look like natural stone, veneer gives you that face without building a full stone wall behind it.

  • Concrete block walls

    When you're planning an outdoor fireplace or a new chimney, a solid block core gives the brick, stone or stucco finish something sturdy and square to sit on.

Call (479) 231-3391 about your fireplace

If you can tell us whether your fireplace is masonry or factory-built, whether the chimney works and which fuel you want, we can talk through your options on that first call.

(479) 231-3391Request an estimate